Random good picture Not show

(1) Heat exchangers might also benefit from treatment with polymers.

(2) The water rises, the heat is transferred to heat exchangers and the water then returns below ground to be reheated.

(3) After the water plate heat exchanger should be met.

(4) Develop price calculation software for heat exchanger product.

(5) Steam heat exchanger heat transmission System.

(6) Expanding heat exchanger coil's hairpin tube copper tube.

(7) Bending the heat exchanger hairpin tube.

(8) Fouling detection for plate heat exchanger?

(9) The breech lock closure type heat exchanger is characterized by reliable sealing performance, easy dismantling and assembling(sentencedict.com/heat exchanger.html), high utilization ratio of heat exchange area and small grounding.

(10) The tube blocking of graphite heat exchanger is attributed to the solid gypsum in dilute phosphoric acid and the scars in the concentration process.

(11) The anti-freezing heat exchanger is arranged in a drain pan.

(12) Titanium heat exchanger: Titanium alloy made heat exchanger can prevent chlorine water, ozone, iodine, bromine and salt water effecting on it and no corrosion and erosion will appear.

(13) The double shell side heat exchanger for use in hydrogenated unit is divided into two kinds of flange type and thread lock ring type.

(14) The structure and performance characteristics of shell heat exchanger corrugated plate are introduced.

(15) The joints behave as the conduits of a subsurface heat exchanger.

(16) The working principle of a bootstrap air cycle refrigeration components is described in detail, such as compressor, turbine, shaft and internal heat exchanger.

(17) A single U-tube is the most common type of ground heat exchange in Ground Coupled Heat Pump (GCHP) system, and ground heat exchanger is an important component of the GCHP system.

(18) In the design of ground-source heat pump (GSHP), the inlet water temperature and velocity of the media in the underground U-tube heat exchanger are very important for heat exchange rate.

(19) The liquid ammonia with oil can produced biuret scale on the urea system in chemical fertilizer plant. The efficiency of heat exchanger and producing capacity of urea were reduced.

(20) The importance of the balance of heat absorption and heat-removal in the operation of the HGSHP's ground heat exchanger was pointed out.

(21) The design and research of the paper has certain reference value to shell-and-tube heat exchanger especially U-tube heat exchanger engineering design.

(22) Tube arrays can be found in the area of heat exchanger, solar collector, electronic cooling and electrodes used in the plating bath.

(23) Measure the cooling air side static inlet pressure (P) in inches of water at the heat exchanger inlet on the pressure indicator. Refer to Table C.

(24) This paper introduced the design of a new type salt heat exchanger on the principle of sacrifice of the positive pole.

(25) Annual total cost is the object function for sewage heat exchanger studied in this paper.

(26) Experiments of heat transfer and pressure drop in a corrugated plate air-cooled heat exchanger were conducted with variable supply air and hot water flow rates.

(27) Heat transfer enhancement was investigated in a coaxial - pipe heat exchanger using dimples on the inner tube.

(28) The method can be used in fast reactor safety analysis and simulating calculation of velocity and temperature in heat exchanger of industry.

(29) The applications and developments of CFD in chemical engineering field which included filled tower, cyclone separator, biochemical reactor, exsiccator , fluidized bed, heat exchanger are reviewed.

(30) The performance of the homemade double metal cyanation complex ( DMC ) catalysts non - stirred tank reactor heat exchanger.